User Manual

4 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
Required Tools
[1] 13mm wrench
(included)
[1] 17mm wrench
(included)
8mm, 10mm, 12mm,
14mm wrenches
(not included)
4mm hex wrench
(included) (included)
Phillips Valve stem adapter
screw driver
(not included)
battery charger
(included)
Before You Start
WARNING: Remove all packing and items from the display box. Make sure that the power switch is turned “OFF”
before assembling the motorbike.
• Allow up to 25 minutes for assembly, not including initial charge time.
• Allow up to 14 hours for the initial charge (see page 7 for charging information).
Estimated Assembly Time
WARNING: DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ PRODUCTS WITH YOUR
Altering of the original
components may or may not be compatible with the design and will void the warranty.
Throttle
Reset button
Brake Lever
On/off switch
Charging port