User Manual

4 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
Required Tools
13mm/15mm/
10mm/ 8mm
wrenches
(included)
5mm/6mm hex
wrenches
(included)
Phillips
screw driver
(included on 5mm
hex wrench)
battery charger
(included)
charging
port
(not visible)
on/off
switch
reset
button
brake lever
throttle
charging port
(right side of motorbike)
on/off and reset button
(left side of motorbike)
Before You Start
WARNING: Remove all packing and items from the display box. Make sure that the power switch is turned “OFF”
before assembling the motorbike.
• Allow up to 25 minutes for assembly, not including initial charge time.
• Allow up to 14 hours for the initial charge (see page 7 for charging information).
Estimated Assembly Time
WARNING: DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ PRODUCTS WITH YOUR
PULSE PERFORMANCE PRODUCTS™ ELECTRIC MOTORBIKE. This motorbike has been built to specic
Pulse Performance Products™ design specications and should not be modied. Altering of the original
components may or may not be compatible with the design and will void the warranty.