Operation Manual

English
10
SINGLE-TIME ALARM
SETTING THE TIME
NOTES ON OPERATING THE WATCH
● If the alarm has been set and the crown is pulled out to the second click, the ALARM
hands will turn to indicate the current time.
[MAIN TIME SETTING]
● When setting the hour hand, be sure to check that AM/PM is correctly set. The watch
is so designed that the date changes once in 24 hours.
● When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time
and then turn it back to the exact minute.
SETTING THE DATE
● It is necessary to adjust the date at the end of February and 30-day months.
● Do not set the date between 9:00 p.m. and 1:00 a.m., as the date may not change
properly.
● Do not press Button when the crown is at the first click position, as this will move the
ALARM hands.
● The single-time alarm cannot be set for a time more than 12 hours ahead of the current
time. While you keep Button pressed to advance the ALARM hands quickly, they stop
when they indicate the current time and the alarm is disengaged. In that case, release
Button, and then, press and hold Button again to set the ALARM hands to the desired
time.