Specifications

- 8 -
GB
DE
GB
FR
ES
IT
PT
NL
SE
DK
NO
FI
GR
RU
3.2.5 LIABILITY
Work on electronic equipment in the unit must be carried out by Heraeus Kulzer, Heraeus Kulzer service partners or
qualified, specialist personnel only
and when the equipment is in a safe status (de-energised).
Only use authorised original spare parts and accessories. Avoid other parts as they hide unknown risks.
The operability and safety of the unit is only guaranteed if the necessary tests, maintenance and repair work is carried
out by
Heraeus Kulzer, Heraeus Kulzer service partners or trained, specialist personnel.
For possible damage coming from a fault / malfunction of the unit due to improper repair, which was not carried out
by
Heraeus Kulzer service partners or by personnel trained by us or in cases where original spare / accessory parts
were not used during a part replacement, Heraeus Kulzer GmbH is
not liable.
4 Unit description
4.1 Delivery contents
1
Charging unit
2 Hand piece
3 Light guide, Ø = 8 mm
4 Protective light cone
5 Rechargeable Lithium-ion battery pack
6 Universal input power supply (100 V – 240 V ( )) including international mains socket adapters:
6a = Europe type 1
6b = UK type 2
6c = US / JP type 3
4.2 Description of the control and operating elements
4.2.1 Hand piece
1
“Start / Stop” button
2 Curing modes LEDs (GREEN)
3 Battery status LED (2-colour: GREEN / YELLOW)
4 Charging unit contacts
5 Alignment key
4.2.2 Alignment key
The alignment key (5), located at the back bottom part of the hand piece’s case, allows the correct
insertion of the hand piece in the charging unit holder.
When inserting the hand piece into the charging unit, the alignment key must be aligned with the
guiding slot positioned inside the charging unit.
A beep confirms that the contacts are in the correct charging position!
4.2.3 Charging unit
Top view elements
1
Charging unit cover
7 Hand piece holder with alignment key and replaceable charging unit contacts
8 Light intensity sensor
9 – GREEN colour LED
Function: It indicates the charging unit is powered up.
10 – 2-colour LED (GREEN / YELLOW)
Function: Light intensity information.
GREEN: Indicates that the light intensity, measured with the built-in light meter is suitable for
eective treatment.
YELLOW: Indicates that the light intensity is insucient.
Bottom view charging unit
11
Power supply socket
12 Replaceable charging contact insert
1x
2x
2x
1x
2x