l Time/calendar l Dual time l Alarm l Countdown timer ENGLISH NSD38_E.indd 1 CAL. WM60 DIGITAL QUARTZ l Stopwatch l Pacer l Illuminating light (Electroluminescent panel) 08.9.
TIME/CALENDAR MODE BUTTONS AND DISPLAYS TIME/CALENDAR SETTING English Hourly chime signal mark A D Month NSD38_E.indd 2-3 Day D Press to adjust the flashing digits. A • The Day of the Week starts flashing. Press to move on to the next item. Setting sequence Day of the Week � Minute � Hour � Date � Month � Year C Press to confirm the settings and return to the TIME/CALENDAR mode.
CHANGEOVER BETWEEN 12-/24- HOUR INDICATION DISPLAY D With each press of button D, the time indication format in the TIME/CALENDAR display can be alternately selected between the 12-hour indication or the 24-hour indication. DUAL TIME MODE A Press to enter the DUAL TIME mode. The dual time mode indicator will appear on the display. CHANGEOVER BETWEEN day of the week and second display B With each press of button B, the Day of the Week or the Second is alternately displayed.
DUAL TIME SETTING C Press to confirm the dual time setting and return to the TIME/ CALENDAR mode. s s NOTES u If the watch is left untouched in the DUAL TIME SETTING mode for about 3 minutes, it will automatically exit the DUAL TIME SETTING mode. CHANGEOVER BETWEEN 12-/24- HOUR INDICATION DISPLAY D A Press to enter the ALARM mode. The alarm mode indicator will appear on the display.
ALARM TIME SETTING C Press and hold for 2 seconds to show the ALARM SETTING mode. s • The Minute starts flashing. D Press to select the minutes to be adjusted. s English s Press to set the minutes to be adjusted. • The Hour starts flashing. D Press to change the hour to be adjusted. s C D Each time you press in the ALARM mode, the alarm is alternately engaged and disengaged. • While the alarm is engaged, the alarm mark will appear on the display.
Elapsed time C English Past time alert A D Normal time PM for normal time NOTES u Except when the countdown timer is counting, if the watch is left untouched for about 3 minutes, it will automatically return to the TIME/CALENDAR mode. NSD38_E.indd 10-11 • The Minute starts flashing. Press to select the minutes to be adjusted. A Press to set the minutes to be adjusted. • The Hour starts flashing. D Press to change the hour to be adjusted.
TIMER OPERATION Press to start counting down. s D Press to stop counting down. English s Press to reset the display to the starting value. NOTES u When the timer finishes counting down, the alarm will sound. Unless you stop the timer by pressing the button D, the timer starts counting up. The elapsed time since the timer started counting up will be shown on the display.
Stopwatch operation Pacer mode D D Start A B Stop Reset Pace B B Start SPLIT B D B SPLIT Stop Reset l Up to 4 split times can be measured. l Press button B to view the split time displayed under SP 1 to SP4 heading. To return to ongoing measuring display, press button B again. 14 C After finishing the measurement, press button C to view the split time(s) taken. B To view the total elapsed time, press button B.
PACER OPERATION B BATTERY CHANGE Press to change the digits to the right pace for you. s D Press to start the pacer. s Press again to stop the pacer. ILLUMINATING LIGHT (Electroluminescent panel) B Press to turn the Electroluminescent backlight on for about 3 seconds. Years Battery life : Approx. 2 years Battery : CR2025 l As the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period.
WARNING CAUTION l The battery is not rechargeable. Never attempt to recharge it, as this may cause battery leakage or damage to the battery. 18 NSD38_E.
NOTE: Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water. MAGNETISM Your watch will not be affected by magnetism. N S 20 NSD38_E.indd 20-21 CARE OF CASE AND BRACELET To p r e v e n t p o s s i b l e rusting of the case and bracelet caused by dust, moisture and perspiration, wipe them periodically with a soft dry cloth.
English PERIODIC CHECK It is recommended that the watch be checked once every 2 2-3 Years to 3 years. Have your watch checked by an AUTHORIZED PULSAR DEALER or SERVICE CENTER to ensure that the case, buttons, gasket and crystal seal remain intact. PRECAUTION REGARDING CASE BACK PROTECTIVE FILM STATIC ELECTRICITY The IC (Integrated Circuit) used in your watch will be a ff e c t e d b y s t a t i c electricity which may disturb the display.
