Operation Manual

18
English
● If the watch is left untouched with the digits flashing, it will automatically return to the
ALARM mode in 1 minute.
● When the time function is displayed in the 24-hour indication, the alarms are also
displayed in the 24-hour indication.
[ALARM ENGAGEMENT/DISENGAGEMENT]
● When any one of the alarms is engaged, the alarm mark is displayed.
STOPWATCH MODE
● After 24 hours have been measured, the stopwatch continues measuring from “00”.
● Restart and stop of the stopwatch can be repeated by pressing button C and button D,
respectively.
● Lap time measurement can be repeated by pressing button C.
● The lap number counts up to “99”.
● The lap time measured remains displayed for 5 seconds together with the flashing lap
number. Then, the display automatically returns to the measurement in progress.
Lap No.
Lap time
● If the digits are reset to “00” in the stopwatch measurement, all the stored data will be
erased from memory.