Operation Manual

36 37
English
English
Light activities will not
affect your watch, but be
careful not to drop your
watch or hit it against
hard surfaces, as this
may cause damage.
Be careful not to expose
the watch to solvents,
mercury, cosmetic spray,
detergents, adhesives or
paints. Otherwise, the
case, bracelet, etc. may become dis-
colored, deteriorated or damaged.
SHOCKS & VIBRATION
CHEMICALS
It is recommended that
the watch be checked
once every 2 to 3
years. Have your watch
checked by an AUTHOR-
IZED PULSAR DEALER or SER-
VICE CENTER to ensure that the
case, buttons, gasket and crystal
seal remain intact.
2 - 3
Years
PERIODIC CHECK
If your watch has a
protective film and/or a
sticker on the case back,
be sure to peel them off
before using your watch.
PRECAUTION REGARDING
CASE BACK PROTECTIVE FILM
The IC (Integrated
Circuit) used in
your watch will be
affected by static
electricity which may
disturb the display. Keep the
watch away from close contact
with objects such as TV screens
which emit strong static electric-
ity.
STATIC ELECTRICITY
Operational temperature
range: Between -5° C
(+23° F) and 50° C (122°
F)
TEMPERATURES
+50°C
5°C
+40°C
0°C
Display temperature
range: Between 0° C (+32°
F) and 40° C (+104° F)
Functional temperature
range of alarm and LED
light: Between 5° C (+41°
F) and 50° C (+122° F)