Operation Manual

22
of the buttons to return to the TIME/CALENDAR mode, and then set the time/calendar
again.
[ADJUSTING THE CONTRAST ON THE DISPLAY]
● The contrast on the liquid crystal display can be adjusted
in 16 steps from level “0” to “15”. The contrast becomes
higher as the digits indicating the contrast level increase
and becomes lower as they decrease.
● The contrast level has been initially set at “10” at the
factory.
● When the contrast level is set to “0”, the digits on the
display will be unable to read.
● With each press of buttons C and E, the contrast level
increases and decreases by one, respectively.
Contrast level
ALARM MODE
[ALARM TIME SETTING]
● The flashing digits move quickly if button C or E is kept pressed.
● If the watch is left untouched with the digits flashing, it will automatically return to the
ALARM mode in 2 to 3 minutes.
● When the time function is displayed in the 24-hour indication, the alarms are also
displayed in the 24-hour indication.
[ALARM ENGAGEMENT/DISENGAGEMENT]
● When any one of the alarms is engaged, the alarm mark is displayed.
● Alarm test: The alarm can be tested by keeping buttons C and D pressed in the TIME/
CALENDAR mode.