Operation Manual

21
NOTES ON USING THE WATCH
MODE CHANGE
● The flashing “SMPT” in the MENU display indicates that the stopwatch is counting.
TIME/CALENDAR MODE
[TIME/CALENDAR SETTING]
● The calendar automatically adjusts for odd and even months including February of leap
years from 1999 to 2048.
● Once the year, month and date have been set, the day of the week is automatically set.
● Setting the seconds:
• With the second digits flashing, press button C or E in accordance with a time signal.
The second digits are reset to “00”.
• When the seconds count any number from “30” to “59” and button C or E is pressed,
one minute is added and the seconds are reset to “00”.
● The flashing digits except the seconds, standard time/daylight saving time and 12-/24-
hour indication move quickly if button C or E is kept pressed.
● If the watch is left untouched with the digits flashing, it will automatically return to the
TIME/CALENDAR mode in 2 to 3 minutes.
● Note on unusual display:
While setting the time/calendar, all the segments of the display will light up if both
buttons C and D are pressed at the same time. This is not a malfunction. Press any one