Operation Manual

24
English
● The lap time and split time measured remain displayed for 10 seconds together with the
flashing lap number. Then, the display automatically returns to the measurement in
progress.
Lap time
Split time
Lap No.
● Even if the digits are reset to “00” in the stopwatch measurement, the stored data is
not erased and can be recalled unless a new measurement is started.
● Even if the STOPWATCH mode is changed to another while the measurement is in
progress, it continues counting properly. After the stopwatch is used, however, be sure
to reset it as the battery energy is consumed enormously to shorten the battery life.
[MEMORY RECALL FUNCTION]
● In the normal display, the lap number is displayed at the bottom row.
● In the enlarged display, the split time is displayed together with the split number.
● If no measurement is made, “NO DATA” will be displayed when button B is pressed
to activate the memory recall function.
TIMER MODE
● The timer counts down the set time repeatedly up to 10 times unless stopped.
[ADJUSTABLE TIMER SETTING]
● The flashing digits move quickly if button C or E is kept pressed.
● If the watch is left untouched with the digits flashing, it will automatically return to the