Operation Manual

19
NOTES ON USING THE WATCH
MODE CHANGE
The design of the liquid crystal panel differs depending on the model.
When the mode is changed over, the display of the selected mode scrolls from right to
left.
TIME/CALENDAR MODE
[TIME/CALENDAR SETTING]
The calendar automatically adjusts for odd and even months including February of leap
years from 2000 to 2050.
Setting the seconds:
With the second digits flashing, press button C or D in accordance with a time signal.
The second digits are reset to “00”.
When the seconds count any number from “30” to “59” and button C or D is pressed,
one minute is added and the seconds are reset to “00”.
Be sure to select the city representing your area. For the city marks and cities they
represent, see “TIME DIFFERENCES” on page 12.
The contrast on the liquid crystal display can be adjusted in 16 steps from level “0” to
“15”. The contrast becomes higher as the digits indicating the contrast level increases
and becomes lower as they decrease.
Changeover between 12- and 24-hour indications are made alternately with each press