Operation Manual

English
12
NOTES ON USING THE WATCH
MODE CHANGE
● When button A is pressed to change over the mode, “Chrono”, “RECAL”, “TIMER”
and “ALARM” is displayed first in the STOPWATCH, MEMORY RECALL, TIMER and
ALARM mode, respectively.
TIME/CALENDAR MODE
● The calendar automatically adjusts for odd and even months including February of leap
years from the year 1996 up to the end of 2045.
● In second setting, when the seconds count any number from “30” to “59” and button
E is pressed, one minute is added and the seconds are reset to “00”.
● The flashing digits except the seconds move quickly if button E is kept pressed.
● When setting the hour digits in the 12-hour indication, check that AM/PM is properly set.
Only “PM” mark is displayed. For the AM setting, there is no indication. In the 24-hour
indication, “24” is displayed.
● Once the year, month and date have been set, the day of the week is automatically set.
● If the watch is left untouched with the digits flashing, it will automatically return to the
TIME/CALENDAR mode in 1 to 2 minutes.
● Note on unusual display:
While setting the time/calendar, all the segments of the display will light up if both
buttons D and E are pressed at the same time. This is not a malfunction. Press button