Operation Manual

English
7
STOPWATCH
 The stopwatch can measure up to 12 hours in 1/5 second increments.
 The measured time is indicated by the three stopwatch hands that move
independently of the hands for time display.
 When the measurement reaches 12 hours, the stopwatch automatically stops counting.
 Before using the stopwatch, be sure to check that the crown is set at the normal
position and that the STOPWATCH hands are reset to the “0” position.
A
Start / Stop / Restart
B
Split /Split release/
Reset
STOPWATCH
hour hand
STOPWATCH
1/5-second hand
STOPWATCH
minute hand
* If the STOPWATCH hands do not return to the “0” position when the stopwatch is
reset to “0”, follow the procedure in “SETTING THE TIME AND ADJUSTING THE
STOPWATCH HAND POSITION”.