Operation Manual

English
English
54
SETTING THE TIME
CROWN
Pull out to second click when the
second hand is at the 12 o'clock
position.
Turn to set the hour and minute
hands.
Push back in to normal position in
accordance with a time signal.
24
12
4
8
16
20
• The 24-hour hand moves correspondingly with the hour hand.
• The moment the date changes is midnight. When setting the hour hand, make sure
that AM/PM is correctly set by using the 24-hour hand as an AM/PM indicator.
Hour hand
Minute hand
Second hand
24-hour hand
SETTING THE DATE
l
Before setting the date, be sure to set the time.
6
CROWN
1
Pull out to rst click.
2
Turn clockwise until the desired date
appears.
3
Push back in to normal position.
Date
• It is necessary to adjust the date on the first day after a 30-day month and February.
• Do not set the date between 9:00 p.m. and 1:00 a.m., as the date may not change
properly. If it is necessary to set the date during that period of time, first change the
time to any time outside of this period, set the date, and then reset to the correct
time.
VD31_E.indd 4-5 2015/07/27 9:22