Operation Manual

English
English
1110
l
While the crown is at the second click, do not press the buttons. Otherwise, the
CHRONOGRAPH hands will move. To reset them to “0” position, see “ADJUSTING
CHRONOGRAPH HAND POSITION” on page 4.
BATTERY CHANGE
l
If the chronograph is used for more than 60 minutes a day, the battery life may
be less than the specified period.
l
As the battery is inserted at the factory to check the function and performance of
the watch, its actual life once in your possession may be less than the specified
period.
l
When the battery expires, be sure to replace it as soon as possible to prevent
any malfunction.
l
We recommend that you contact an AUTHORIZED PULSAR DEALER for battery
replacement.
l
While the chronograph is counting, do not pull out the crown to set the time.
Otherwise,the chronograph operation cannot be made.
l
The CHRONOGRAPH 1/10-second scale and hand differ in design and shape depending
on the models.
* Some models have the CHRONOGRAPH 1/10-second scale graduated on the upper
half of the small dial and the hand which is so designed that both ends can indicate
the elapsed 1/10 second. In that case, read the marker on the scale where either
end of the hand points to.
CHRONOGRAPH
Battery life : Approx. 2 years
Battery : SEIKO SR920SW
2
Years