User Instructions

5
3. Operation indication (see table 3)
Table 3. Operation indication
OPTICAL INDICATION OF THE SWITCH's POWER SUPPLY
YELLOW LED LIGHT (Power)
Indication of the switch's power
supply
PWR
OFF – no power supply of the switch
ON – power supply on, normal operation
OPTICAL INDICATION AT THE PoE PORTS (1÷16)
GREEN LED LIGHT (PoE)
Indication of the PoE power supply
at the RJ45 ports
OFF- no power supply at the RJ45 port (the device is not connected or not compliant with
the IEEE802.3af standard)
ON – supply
Blinking – short-circuit or output overload
YELLOW LED LIGHT (LINK)
The connection status of LAN
devices, 10MB/s or 100Mb/s
and data transmission
OFF- no connection
ON - the device is connected; 10Mb/s or 100Mb/s
Blinking – data transmission
OPTICAL INDICATION AT THE UPLINK PORT (G1/TP, G2/TP, G1/SFP, G2/SFP)
YELLOW LED
LIGHT (LINK)
OFF- no connection
ON - the device is connected
Blinking – data transmission
CAUTION! The operating status of the G1/TP, G1/SFP, G2/TP and G2/SFP slots is
shown on the LEDs located near the RJ45 connector (see below).
CAUTION! G1/TP and G1/SFP or G2/TP and G2/SFP sockets can not operate
simultaneously.
These are COMBO type sockets.
GREEN LED
LIGHT
(SPEED)
OFF – connection 10Mb/s or 100Mb/s
ON - connection 1000Mb/s
CAUTION! The operating status of the G1/TP, G1/SFP, G2/TP and G2/SFP slots is
shown on the LEDs located near the RJ45 connector (see below).
CAUTION! G1/TP and G1/SFP or G2/TP and G2/SFP sockets can not operate
simultaneously.
These are COMBO type sockets.
WEEE LABEL
Waste electrical and electronic equipment must not be disposed of with normal household waste.
According to the European Union WEEE Directive, waste electrical and electronic equipment should be
disposed of separately from normal household waste.
Pulsar sp. j.
Siedlec 150, 32-744 Łapczyca, Poland
Tel. [phone], Fax. [phone]
e-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl