Data Sheet

Table Of Contents
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
PARAMETERS OF THE SWITCH
Ports
8 x PoE (10/100 Mb/s) (RJ-45)
2 x UPLINK (10/100/1000 Mb/s) (RJ-45)
2 x UPLINK (10/100/1000 Mb/s) (SFP)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE802.3af/at (1÷8 ports), 52 V DC / 30 W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Forwarding rate
10BASE-T: 14880 pps/port
100BASE-TX: 148800 pps/port
Bandwidth
1,6 Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
Supply
~200-240 V; 50 Hz;1 A
Supply power
110 W
Output current at the PoE ports (RJ45)
8 x 0,6 A ΣI=2 A (max.)
Output voltage at the PoE ports (RJ45)
52 V DC
Short-circuit protection SCP and
overload protection OLP
105 % ÷ 150 % PSU power, manual restart (the fault requires
disconnection of the DC output circuit)
PSU current consumption
200 mA
Battery charge current
0,5 A max. / 2x17 Ah (+/-5 %)
Approximate backup time
5h 30 min
Battery circuit protection SCP and
reverse polarity connection
melting fuse
Deep discharge battery protection UVP
U<19 V (± 5 %) – disconnection of the batteries
Sabotage protection:
- TAMPER output indicating enclosure
opening
- microswitch, NC contacts (enclosure closed),
0,5 A@50 V DC (max.)
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 96 W.
ELECTRICAL PARAMETERS
MECHANICAL PARAMETERS
Dimensions
The dimensions of the battery
compartment
Gross/Net weight
Enclosure
Closing
Connectors
Notes
SF108-B 10-port switch with buffer power supply for 8 IP cameras
Pulsar
®