Operation Manual

If a 0.35 meter (13.7 inch) wide target fits between the two closest center
marks on the horizontal line of the reticle, the target is 50 meters (55
yards) away. If the same target fits between the marks located just
beneath the horizontal line of the reticle, the target is 100 meters (110
yards) away. If the same target fits between the marks located above the
horizontal line of the reticle, the target is 25 meters (27 yards) away.
Please see a drawing below.
Picture: Target Size 0.35 m
- Distance 100m/110y
RETICLE AS A RANGEFINDER
The rangefinding reticle in your Sentinel G2+ was designed to assist you
in determining the range of your target. The range can be determined
using marks (chevrons) on horizontal line as well as bars on vertical line
of the reticle.
Note: To utilize this feature, the Sentinel G2+ needs to be sighted at 50
meters (55 yards).
8
65
HORIZONTAL SCALE
3
6
10
11
4
5
1
2
+
+
-
-
AA / 1.5 V AA / 1.5 V
8
9
12 7
Using live ammunition, take 3 or 4 control shots, continually aiming at the
same hit point on the target (you may also use a laser bore sighter and
align the laser point to the center of the cross hairs).
Examine the target and determine if the aiming point coincides with point
of impact, if you determine it's necessary to make corrections, you will
need to adjust your aiming point. To move it downwards and to the left,
turn the knob (13) counterclockwise, in the directions Down and Left
respectively, the aiming poin moves upwards and to the right; keep in
mind that one click of the knob corresponds to a 20mm shift of the hit
point at a distance of 100m (Sentinel G2+); 1.533 cm/ 100m (Sentinel
G2+ 3x50 MD) or 1.232 cm/100m (Sentinel G2+ 4x60 MD).
Check the accuracy of your adjustments by firing other 3 or 4 control
shots.