Manualshelf

User Instructions

ManualsBrandsPulsar ManualsIn hermetic enclosure IP56S64H 6-port switch with power supply for 4 IP cameras in hermetic enclosure
123456
5
The shock protection circuit shall be performed with a particular care, i.e. the yellow and green
wire coat of the power cable shall stick to one side of the terminal - marked with ‘ ‘ symbol on the
PSU enclosure. Operation of the PSU without the properly made and fully operational shock
protection circuit is UNACCEPTABLE! It can cause a device failure or an electric shock.
3. Connect the camera wires to the RJ45 connectors (PoE connectors).
4. Connect the power (230 V).
5. Check the optical indication of the switch operation (see Table 4).
6. After installing and checking proper working, the enclosure can be closed.
Connection schemes.