User Instructions

ManualsBrandsPulsar ManualsEquipment for IP camerasS116 16-port switch for 16 IP cameras

S116

v.1.0

S116 16-port switch for 16 IP cameras

Edition: 1 from 16.01.2020

Supercedes the edition: ----------- EN

Features:

 16 ports switch

16 PoE ports 10/100Mb/s (data and power supply)

2 ports 10/100/1000Mb/s (G1/G2 ports) (UpLink)

 Long Range mode (up to 250m)

 30 W for each PoE port, supports devices complaint

with the IEEE802.3af/at (PoE+) standard

 Supports auto-learning and auto-aging of MAC

addresses (16K size)

 LED indication

 Additional assembly elements

 warranty – 2 year from the production date

Example of use.

1. Technical description

1.1. General description.

S116 is a 16-ports PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard.

Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 – 16 ports of the switch. The G1 and

G2 ports is used for connection of another network device via RJ45 connector. The LEDs at the front panel indicate the

operation status (description in the table below).

The PoE technology ensures a network connection and reduces installation costs by eliminating the need to supply a

separate power cable for each device. This method allows supplying other network devices, such as IP phone, wireless access

point or router.

Summary of content (5 pages)

PAGE 1
S116 v.1.0 S116 16-port switch for 16 IP cameras Edition: 1 from 16.01.2020 Supercedes the edition: ----------- PL EN Features:        16 ports switch 16 PoE ports 10/100Mb/s (data and power supply) 2 ports 10/100/1000Mb/s (G1/G2 ports) (UpLink) Long Range mode (up to 250m) 30 W for each PoE port, supports devices complaint with the IEEE802.
PAGE 2
1.2 Block diagram. Fig. 1. Block diagram. 1.3 Description of components and connectors. Table 1. (See Fig. 2, 3 and 4) Component No. (Fig. 2) [1] [2] [3] [4] [5] [6] [7] Description LED indication 16 x PoE ports (1÷16) 2 x UP LINK ports (G1, G2) Fan Power Socket of the AC Switch of mode Long Range Additional mounting elements Fig. 2. The front power of the switch. Fig. 3. Rear panel of the switch.
PAGE 3
Fig. 4. The view of the switch. 1.4 Technical parameters Table 2. Ports PoE power supply Operating modes Protocols, Standards Bandwidth Transmission method Optical indication of operation Power supply Operating conditions Dimensions Additional equipment Cable length AC Gross/Net weight Protection class EN 60950-1:2007 Storage temperature Declarations 16 x PoE (10/100Mb/s) (RJ-45) 2 x UpLink (10/100/1000Mb/s) (RJ-45) with connection speed auto-negotiation and MDI/MDIX Auto Cross) IEEE 802.
PAGE 4
2. Installation 2.1. Requirements The unit should be mounted in confined spaces, in accordance with the 2nd environmental class, with normal relative humidity (RH=90% maximum, without condensation) and temperature from -10°C to +40°C. Ensure the free flow of air around the unit. The PSU shall work in a vertical position that guarantees sufficient convectional air-flow through ventilating holes of the enclosure. The switch load balance should be done before installation.
PAGE 5
3. Operation indication. Table 3.