Data Sheet

S116 v.1.0/I
16 16 16S1 -port switch for IP cameras
CODE
TYPE
:
:
DESCRIPTION
S116 is a 16-ports PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard.
Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 – 16 ports of the switch. The G1
and G2 ports is used for connection of another network device via RJ45 connector. The LEDs at the front panel indicate the
operation status.
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to
supply a separate power cable for each device. This method allows supplying other network devices, such as IP
phone, wireless access point or router.
EN**
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
S116 16-port switch for 16 IP cameras
Ports
16 x PoE (10/100Mb/s) (RJ-45)
2 x UpLink (10/100/1000Mb/s) (RJ-45)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802. 3af/at (1÷16 ports), 52 V DC / 30 W at each port *
Operating modes
Long Range, VLAN
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Bandwidth
14,8Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
Power supply
~100-240 V; 50/60 Hz; 3,1-1,8 A
Operating conditions
temperature -10°C ÷ 40°C,
relative humidity 5% - 90%, no condensation
Dimensions
W=270, H=44, D=181 [+/- 2mm]
Additional equipment
bracket for Rack 19”
Cable length AC
1,2m
Net/gross weight
1,7 / 1,9kg
Protection class
EN 60950-1:2007
I (first)
Storage temperatur
-20°C ÷ 60°C
Declarations, warranty
CE, 2 year from the production date
Features:
· 16 ports switch
16 PoE ports 10/100Mb/s (data and power supply)
2 ports 10/100/1000Mb/s (G1/G2 ports) (UpLink)
· Long Range mode (up to 250m)
· 30W for each PoE port, supports devices complaint with
the IEEE802.3af/at (PoE+) standard
· Supports auto-learning and auto-aging of MAC addresses
(16K size)
· LED indication
· Additional assembly elements
· warranty – 2 year from the production date
TECHNICAL PARAMETERS
Pulsar
®
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 160 W when all PoE ports
are being used.
W
H
D