User Instructions

4
Fig. 3. The view of the switch.
Table 2. (See Fig.3)
Component No
(Fig. 3)
Description
[1]
8 x PoE ports (1÷8)
[2]
2 x UPLINK port
[3]
52 V DC power supply socket
[4]
Additional assembly elements
[5]
Switch of mode Long Range
1.4 Technical parameters
- parameters of the switch (tab.3)
- electrical parameters (tab.4)
- mechanical parameters (tab.5)
- operation safety (tab.6)
- operating parameters (tab.7)
Table 3. Parameters of the switch
Ports
10 ports 10/100Mb/s (8 x PoE + 2 x UP LINK)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802.3af/at (1÷8 ports), 52 V DC / 30 W at each port *
Long Range mode
Long Range, VLAN
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Bandwidth
1,6Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 96 W.
Table 4. Electrical parameters
Mains supply
~200-240 V; 50 Hz
Current up to
1 A
Supply power
110 W
Output current at the PoE ports (RJ45)
8 x 0,6 A ΣI=2 A (max.)
Output voltage at the PoE ports (RJ45)
52 V DC
Short-circuit protection SCP and overload protection OLP
105% ÷ 150% PSU power, automatic recovery
(the fault requires disconnection of the DC output circuit)
PSU current consumption
250m A/27,6 V DC
Battery charge current
0,5 A max. /2x17 Ah (+/-5%)
Approximate backup time
5h 30min
Battery circuit protection SCP and reverse
polarity connection
melting fuse
Deep discharge battery protection UVP
U<19 V (± 5%) – disconnection of the batteries
Sabotage protection:
- TAMPER output indicating enclosure opening
- microswitch, NC contacts (enclosure closed),
0,5 A@50 V DC (max.)