Data Sheet

wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
PARAMETERS OF THE SWITCH
Ports
10 ports 10/100Mb/s (8 x PoE + 2 x UP LINK)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802.3af/at (1÷8 ports), 52 V DC / 30 W at each port *
Long Range mode
Long Range, VLAN
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Bandwidth
1,6 Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
Mains supply
~200-240 V; 50 Hz
Current up to
1 A
Supply power
110 W
Output current at the PoE ports (RJ45)
8 x 0,6 A ΣI=2 A (max.)
Output voltage at the PoE ports (RJ45)
52 V DC
Short-circuit protection SCP and
overload protection OLP
105% ÷ 150% PSU power, automatic recovery
(the fault requires disconnection of the DC output circuit)
PSU current consumption
250 mA/27,6 V DC
Battery charge current
0,5 A max. /2x17 Ah (+/-5%)
Approximate backup time
5h 30min
Battery circuit protection SCP and
reverse polarity connection
melting fuse
Deep discharge battery protection UVP
U<19 V (± 5%) – disconnection of the batteries
Sabotage protection:
- TAMPER output indicating enclosure
opening
- microswitch, NC contacts (enclosure closed),
0,5 A@50 V DC (max.)
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 96 W.
ELECTRICAL PARAMETERS
MECHANICAL PARAMETERS
Dimensions
W=397, H=350, D+D1=92+8 [+/- 2mm]
W1=402, H1=355 [+/- 2mm]
The dimensions of the battery
compartment
370 x 180 x 80mm (WxHxD) max
Gross/Net weight
4,8 / 5,1 kg
Enclosure
Steel plate, DC01 1,0mm color white RAL 9003
Closing
Cheese head screw x 2 (at the front), (lock assembly possible)
Connectors
Power supply of the cameras: RJ45 socket
230 V input: Φ 0,63-2,50 (AWG 22-10),
Battery output BAT: 6,3F-2,5
TAMPER output: wires
Notes
The enclosure does not touch the assembly surface so that cables can be
led.
S108-B 10-port switch with buffer power supply for 8 IP cameras
Pulsar
®