Data Sheet

Ports
10 10/100Mb/s ports (8 x PoE + 2 x UP LINK)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE802.3af/at (1÷8 ports), 52VDC / 30W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Forwarding rate
10BASE-T: 14880pps/port
100BASE-TX: 148800pps/port
Bandwidth
1,6Gbps
Transmission method
Store-and-Forward
Optical indication of operation
Switch power supply;
Link/Act;
PoE Status
PARAMETERS OF THE SWITCH
* The given value of 30W per port is the maximum value. The total power consumption should not exceed 120W when all PoE ports
are being used.
ELECTRICAL PARAMETERS
Mains supply
230V AC (-15%/+10%) 50Hz
Current up to
1,3A max. / 230VAC
Supply power
196W
Output voltage at the PoE ports
Output voltage the recorder – NVR
52V DC – maintained regardless of the state of battery charge
12V DC – maintained regardless of the state of battery charge
The output current at the PoE ports
8 x 0,6A ΣI=2,3A (max.)
Output current of the recorder – NVR
4A
Ripple voltage – output of the NVR
recorder
150 mV p-p max.
Battery charge current
(batteries 2x7Ah / 2x17Ah / 2x28Ah,
connect batteries in series)
1A max. (+/-5%)
Approximate backup time
5h 30min
Short-circuit protection SCP and
overload protection OLP
105% ÷ 150% of the PSU power, manual restart (failure requires the
disconnection of the DC output)
PSU current consumption
300mA/27,6V
Battery circuit protection SCP and
reverse polarity connection
melting fuse
Excessive discharge protection UVP
U<19V (+/-5%) – disconnect of connection battery
Optical indication of operation
LED: AC, DC, TEMP, LoB, ALARM, LINK, PoE
Acoustic operation indication:
Piezoelectric indicator ~75dB/0,3m
The ALARM technical output of collective
failure
Relay type: 1A@ 30VDC/50VAC
The F
MAINS
fuse in the 230V power supply
circuit
T 6,3A
MECHANICAL PARAMETERS
Mounting dimensions
W=19”, H=2U, D=307
Dimensions
W=482, W
1
=442, H=88, D=307, D
1
=32, D
2
=10 [+/- 2mm]
Fixation
four-point butt mounting to RACK profiles – the set include 4 M6 screws + cage
nuts
Net / gross weight
7,0kg / 7,5kg
Enclosure
Steel plate RAL 9005, black
Connectors
230V AC input: the IEC C14 socket with a fuse, power cable 2m
(included)
Technical output ALARM: Φ0,5-2,1 (AWG 24-12) 0,5-1,5mm
2
Power supply output of the NVR recorder: Φ0,5-2,1 (AWG 24-12) 0,5-1,5mm
2
,
power cord 2m, terminated with the DC 5,5/2,1 plug (included)
Outputs of cameras PoE: sockets RJ45 8P8C
Data output of the UPLINK recorder: RJ45 8P8C jack
Battery output BAT: 6,3F-2,5
Notes
Forced cooling (fan).
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
s
for 8 IP
RSUPS108R 10-port switch with buffer power supply
cameras and recorder, RACK mounted