Data Sheet

Ports
10 10/100Mb/s ports (8 x PoE + 2 x UPLINK)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802.3af/at (1÷8 ports), 52 V DC / 30 W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Forwarding rate
10BASE-T: 14880pps/port
100BASE-TX: 148800pps/port
Bandwidth
1,6Gbps
Transmission method
Store-and-Forward
Optical indication of operation
Switch power supply;
Link/Act;
PoE Status
PARAMETERS OF THE SWITCH
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 96 W.
ELECTRICAL PARAMETERS
Mains supply
~230 V; 50 Hz
Current up to
1,1 A
Supply power
110 W
Output voltage at the PoE ports
52 V DC – maintained regardless of the state of battery charge
The output current at the PoE ports
8 x 0,6 A ΣI=2 A (max.)
Battery charge current
(batteries 2x7 Ah/ 2x17 Ah, connect
batteries in series)
0,5 A max. (+/-5%)
Short-circuit protection SCP and
overload protection OLP
105% ÷ 150% of the PSU power, manual restart
(failure requires the disconnection of the DC output)
PSU current consumption
200m A/27,6 V
Battery charge current
0,5 A max. (+/-5%)
Approximate backup time
5h 30min
Battery circuit protection SCP and
reverse polarity connection
melting fuse
Excessive discharge protection UVP
U<19 V (+/-5%) – disconnect of connection battery
Optical indication of operation
LED: AC, DC, TEMP, LoB, ALARM, LINK, PoE
Acoustic operation indication:
Piezoelectric indicator ~75dB/0,3m
The ALARM technical output of collective
failure
Relay type: 1 A@ 30 V DC/50 V AC
The F
MAINS
fuse in the 230 V power supply
circuit
T 3,15 A
MECHANICAL PARAMETERS
Mounting dimensions
W=19”, H=2U, D=307
Dimensions
W=482, W
1
=442, H=88, D=307, D
1
=32, D
2
=10 [+/- 2mm]
Fixation
four-point butt mounting to RACK profiles – the set include 4 M6 screws
+ cage nuts
Net / gross weight
6,3/ 6,8 kg
Enclosure
Steel plate RAL 9005, black
Connectors
230 V AC input: the IEC C14 socket with a fuse, power cable 1,5m
(included)
Technical output ALARM: Φ0,5-2,1 (AWG 24-12) 0,5-1,5mm
2
Outputs of cameras PoE: sockets RJ45 8P8C
Data output of the UPLINK recorder: RJ45 8P8C jack
Battery output BAT: 6,3F-2,5
Notes
Forced cooling (fan).
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
10 s 8 RSUPS108 -port switch with buffer power supply for IP cameras,
RACK mounted