User Instructions

www.pulsar.pl RSGUPS108R RACK POWER
8
3. Indication of the device operation.
3.1. LED indication of operating status.
The PSU has 6 LED lights at the front panel:
GREEN LED:
 on – the PSU is supplied with 230V AC
 off – no 230V AC supply
GREEN LED:
 on – DC voltage at the output of the switch mode PSU
 off – no DC voltage at the output of the switch mode PSU
RED LED:
 on – failure
 off – no failure
RED LED:
 ON – too high temperature of the switch mode power supply
(>70°C)
 OFF – standard temperature of the switch mode power supply
RED LED:
 on – battery voltage <23V
 off – battery voltage >23V
GREEN LED:
 ON – DC voltage at the NVR output
 OFF - no DC voltage at the NVR output
3.2. Optical indication of the switch operation:
OPTICAL INDICATION OF THE SWITCH's POWER SUPPLY
GREEN LED LIGHT (Power)
Indication of the switch's power
supply
OFF – no power supply of the switch
ON – power supply on, normal operation
OPTICAL INDICATION OF THE SWITCH's POWER SUPPLY (1÷8)
GREEN LED LIGHT (PoE)
Indication of the PoE power
supply at the RJ45 ports
OFF- no power supply at the RJ45 port (the device is not connected or not compliant
with the IEEE802.3af/at standard)
ON – supply at the RJ45 port
Blinking – short-circuit or output overload
YELLOW LED LIGHT (LINK)
The connection status of LAN
devices, 10/100/1000Mb/s
and data transmission
OFF- no connection
ON - the device is connected; 10/100/1000Mb/s
Blinking – data transmission
OPTICAL INDICATION AT THE UP LINK PORT
GREEN LED LIGHT
OFF- no connection or device connected /the device is connected 10/100Mb/s
ON – the device is connected 1000Mb/s
YELLOW LED LIGHT (LINK)
The connection status of LAN
devices, 10/100/1000Mb/s
and data transmission
OFF- no data transmission
ON - the device is connected: 10/100/1000Mb/s
Blinking – data transmission