User Instructions

www.pulsar.pl RSGUPS108R RACK POWER

Fig.2. The view of the switch.

Table 2. (See Fig. 3 and 4)

Element no.

[Fig. 3 and 4]

Description

AC OK – green LED, indicating the presence of 230V voltage

DC OK – green LED, indicating the presence of DC voltage

TEMP – red LED, indicating too high temperature of the power supply (>70°C)

LoB – red LED, indicating too low battery voltage (<23V)

LED NVR – green LED indicating voltage at the NVR output

LED ALARM – red LED collective failure indication

NVR – power supply output of the recorder

BAT – battery output

ALARM – technical output of collective failure – relay

BUZZER, micro switch, turning ON / OFF of acoustic indication

switch in the top position, indication ON

switch in the down position, indication OFF

PoE port 1÷8 for cameras IP connection (data + power supply)

2 x UPLINK ports

230V AC INPUT, power socket 230V AC, power cable 1,5m included

MAINS

, fuse in the supply circuit 230V AC, T 6,3A/250V

Fig. 3. The front power of the power supply unit.

Fig. 4. Rear panel of the power supply.