User Instructions

www.pulsar.pl RSGUPS108R RACK POWER
2
Example of use.
CONTENTS:
1. Technical description.
1.1. General description
1.2. Block diagram
1.3. Description of components and connectors
1.4. Specifications
2. Installation.
2.1. Requirements
2.2. Installation procedure
3. Indication of the device operation.
3.1. LED indication of operating status
3.2. Optical indication of the switch operation
3.3. Technical output
3.4. Acoustic indication
4. Operation and use.
4.1. Overload or short circuit of the PSU output
4.2. Battery-assisted operation
4.3. Maintenance
Features:
 DC 52V uninterruptible power supply of 8 IP
cameras
 DC 12V uninterruptible power supply of the recorder
 Switch 10 ports:
8 PoE ports 10/100/1000Mb/s, (1÷8 ports) (data and
power supply)
2 10/100/1000Mb/s ports (UpLink)
 30W for each PoE port, supports devices complaint
with the IEEE802.3af/at (PoE+) standard
 Supports auto-learning and auto-aging of MAC
addresses (1K size)
 battery charging and maintenance control
 excessive discharging (UVP) protection
 battery output protection against short circuit and
reverse connection
 battery charge current: 1A
(batteries 2x7Ah / 2x17Ah / 2x28Ah)
 Approximate backup time: 5h 30min
 voltage control at the NVR output
 acoustic indication of failure
 LED optical indication: AC, DC, TEMP, LoB,
ALARM, NVR
 the ALARM technical output of collective failure
– relay type, activated by:
 230V AC power loss
 low voltage of the PSU (<23V)
 no voltage at the power supply output of the
recorder
 too high temperature of the PSU (>70°C)
 the PSU failure
 protections:
 SCP short-circuit protection
 overvoltage protection
 overload protection OLP
 forced cooling (fan)
 warranty – 2 year from the production date