RSGUPS108 v.1.1 RSGUPS108 10-ports switch with buffer power supply for 8 IP cameras, RACK mounted. EN Edition: 2 from 14.02.2019 Supercedes the edition: 1 from 23.03.
www.pulsar.pl RACK POWER RSGUPS108 Features: Uninterruptible power supply of 8 IP cameras (52 V DC) Switch 10 ports: 8 PoE ports 10/100/1000 Mb/s, (1÷8 ports) (data and power supply) 2 10/100/1000 Mb/s ports (UpLink) 30 W for each PoE port, supports devices complaint with the IEEE802.
www.pulsar.pl 1. RSGUPS108 RACK POWER Technical description. 1.1. General description. The RSGUPS108 is a complete solution for power supply and battery backup of 8 IP cameras (52 V DC power supply) in RACK 19" standard.
www.pulsar.pl RSGUPS108 BUZZER, micro switch, turning ON / OFF of acoustic indication switch in the top position, indication ON switch in the down position, indication OFF PoE port 1÷8 for cameras IP connection (data + power supply) 2 x UP LINK port 230 V INPUT, power socket 230 V, power cable 1,5 m included FMAINS, fuse in the supply circuit 230 V, T 3,15 A/250 V Fig. 2. The front power of the power supply unit. Fig. 3. The rear power of the power supply unit. Fig.4. The view of the PSU.
www.pulsar.pl RSGUPS108 RACK POWER Fig.5. The view of the switch. Table 2. (See Fig. 5). Element no. [Fig. 5] Description LINK - yellow LED - indicating the LAN connection status PoE - green LED indicating voltage at the PoE port PWR - green LED indicating the supply voltage of the Switch PoE ports 1÷8 for cameras IP connection (data + power supply) 2 x UP LINK port 1.4. Specifications. - parameters of the switch (tab.3) - electrical parameters (tab.4) - mechanical parameters (tab.
www.pulsar.pl RACK POWER RSGUPS108 Mechanical parameters (tab. 5).
www.pulsar.pl RSGUPS108 RACK POWER As the PSU is designed for a continuous operation and is not equipped with a power-switch, therefore an appropriate overload protection shall be guaranteed in the power supply circuit. Moreover, the user shall be informed about the method of unplugging (usually through assigning an appropriate fuse in the fuse-box). The electrical system shall follow valid standards and regulations. 2.2. Installation procedure. 1.
www.pulsar.pl RSGUPS108 RACK POWER 3.2. Optical indication of the switch operation: OPTICAL INDICATION OF THE SWITCH's POWER SUPPLY GREEN LED LIGHT (Power) Indication of the switch's power supply OFF – no power supply of the switch ON – power supply on, normal operation OPTICAL INDICATION OF THE SWITCH's POWER SUPPLY (1÷8) GREEN LED LIGHT (PoE) Indication of the PoE power supply at the RJ45 ports OFF- no power supply at the RJ45 port (the device is not connected or not compliant with the IEEE802.
www.pulsar.pl RSGUPS108 RACK POWER 4. Operation and use. 4.1. Overload or short circuit of the PSU output. In case of overload, the output voltage is automatically shut off, and so is the LED indicator. The restoration of the voltage takes place immediately once the failure (overload) is over. 4.2. Battery-assisted operation. In case of a main power outage, the device is immediately switched into a battery-assisted operation. The PSU is equipped with the discharged battery disconnection system.
www.pulsar.pl RSGUPS108 RACK POWER WEEE LABEL Waste electrical and electronic equipment must not be disposed of with normal household waste. According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from normal household waste. The power supply unit is adapted for a sealed lead-acid battery (SLA). After the operation period it must not be disposed of but recycled according to the applicable law. Pulsar sp. j.
