Data Sheet

Ports
10 10/100/1000 Mb/s ports (8 x PoE + 2 x UP LINK)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE802.3af/at (1÷8 ports), 52 V DC / 30 W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Bandwidth
16 Gbps
Transmission method
Store-and-Forward
Optical indication of operation
Switch power supply;
Link/Act;
PoE Status
PARAMETERS OF THE SWITCH
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 96 W.
ELECTRICAL PARAMETERS
Mains supply
~230 V; 50 Hz
Current up to
1,1 A
Supply power
110 W
Output voltage at the PoE ports
52 V DC – maintained regardless of the state of battery charge
The output current at the PoE ports
8 x 0,6 A ΣI=2 A (max.)
Battery charge current
(batteries 2x7 Ah / 2x17 Ah / 2x28 Ah,
connect batteries in series)
0,5 A max. (+/-5 %)
Approximate backup time
5 h 30 min
Short-circuit protection SCP and
overload protection OLP
105 % ÷ 150 % of the PSU power, manual restart
(failure requires the disconnection of the DC output)
PSU current consumption
200 mA/27,6 V
Battery circuit protection SCP and
reverse polarity connection
melting fuse
Excessive discharge protection UVP
U<19 V (+/-5 %) – disconnect of connection battery
Optical indication of operation
LED: AC, DC, TEMP, LoB, ALARM, LINK, PoE
Acoustic operation indication:
Piezoelectric indicator ~75 dB/0,3 m
The ALARM technical output of collective
failure
Relay type: 1A@ 30 V DC/50 V AC
The F
MAINS
fuse in the 230 V power supply
circuit
T 3,15 A
MECHANICAL PARAMETERS
Mounting dimensions
W=19”, H=2U, D=307
Dimensions
W=482, W
1
=442, H=88, D=307, D
1
=32, D
2
=10 [+/- 2mm]
Fixation
four-point butt mounting to RACK profiles – the set include 4 M6 screws + cage
nuts
Net / gross weight
6,4kg / 6,9kg
Enclosure
Steel plate RAL 9005, black
Connectors
230 V input: the IEC C14 socket with a fuse, power cable 1,5 m
(included)
Technical output ALARM: Φ0,5-2,1 (AWG 24-12) 0,5-1,5 mm
2
Outputs of cameras PoE: sockets RJ45 8P8C
Data output of the UPLINK recorder: RJ45 8P8C jack
Battery output BAT: 6,3F-2,5
Notes
Forced cooling (fan).
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
s for 8 IP RSGUPS108 10-port switch with buffer power supply cameras,
RACK mounted