User Instructions
2
1. Technical description.
1.1. General description.
RSFUPS116R is a 16- ports PoE in RACK 19” enclosure, switch designed for uninterrupted supply IP cameras
operating in IEEE 802.3af/at standard (54 V DC power supply) of recorder (12 V DC power supply).
In case of power decay, a battery back-up is activated immediately.
The approximate backup time is given assuming that all output ports are used (using typical devices and 17 Ah
batteries). The electricity consumption for own needs and the energy efficiency of the power intake track were taken into
account. The exact description of how to perform the calculations can be found at: "Approximate backup time - assumptions for
calculations".
Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 – 16 ports of the switch. The
G1/TP, G2/TP ports is used for connection of another network device via RJ45 connector. The switch is fitted with SFP slots;
the use of fiber optic module (GBIC) allows fiber optic transmission. The LEDs at the front panel indicate the operation status
(description in the table. 7). The switch is housed in a metal enclosure RACK 19” (color: black RAL 9005).
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to supply a
separate power cable for each device. This method allows supplying other network devices, such as IP phone, wireless access
point or router.
1.2. Block diagram.
Fig. 1. Block diagram.
1.3. Description of components and connectors.
Table 1. (see Fig. 2)
Element no.
(Fig. 2)
Description
[1]
16 x PoE port (1÷16)
[2]
2 x UPLINK port (G1/TP, G2/TP)
[3]
2 x UPLINK port (G1/SFP, G2/SFP)
[4]
LED lights: power supply and LAN connection status at the PoE ports
[5]
BAT +, BAT - battery output + BAT red, - BAT black
[6]
PWR LED indicating the supply voltage at the power input of the switch
[7]
NVR – Independently protected power supply output of the recorder
[8]
230 V INPUT, power socket 230 V, power cable 1,5 m included
[9]
F
MAINS
, fuse in the supply circuit 230 V, T 6,3 A/250 V