Data Sheet

wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
PARAMETERS OF THE SWITCH
Ports
16 x PoE (10/100 Mb/s) (RJ-45)
2 x UPLINK (10/100/1000 Mb/s) (RJ-45)
2 x UPLINK (10/100/1000 Mb/s) (SFP)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802.3af/at (1÷16 ports), 54 V DC / 30 W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Bandwidth
14,8 Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
Mains supply
~230 V; 50 Hz
Current up to
1,5 A
Supply power
267 W
Output current at the PoE ports (RJ45)
16 x 0,6 A ΣI=4 A (max.)
Output voltage at the PoE ports (RJ45)
54 V DC
NVR output – recorder
12 V DC / 4 A (max.)
PSU current consumption
250 mA
Battery charge current
(batteries 4x7 Ah / 4x17 Ah, connect
batteries in series)
0,5 A max. /4x12 V (+/-5 %)
Approximate backup time
4 h
Battery circuit protection SCP and
reverse polarity connection
melting fuse
Deep discharge battery protection UVP
U<38 V (± 5 %) – disconnection of the batteries
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 192 W.
ELECTRICAL PARAMETERS
MECHANICAL PARAMETERS
Mounting dimensions
W=19”, H=2U, D=348
Dimensions
W=482, W
1
=446, H=88, D=348, D
1
=32, D
2
=15 [+/- 2 mm]
Fixation
four-point butt mounting to RACK profiles – the set include 4 M6 screws + cage nuts
Gross/Net weight
6,5 / 7,0 kg
Enclosure
Steel plate, DC01 1,0mm color: black RAL 9005
Connectors
Power supply of the cameras: RJ45 socket
Output of recorder: RJ45 socket or SFP
The recorder power supply output: Φ0,5-2,1 (AWG 24-12) 0,5-1,5 mm
2
,
power cord 2 m, terminated with the DC 5,5/2,1 plug (included)
Outputs: Φ 0,63-2,50 (AWG 22-10), battery output BAT: 6,3F-2,5
Notes
Forced cooling (fan).
Pulsar
®
RSFUPS116R 16-port switch with buffer power supply
for 16 IP cameras and recorder, RACK mounted