Operating instructions

www.pulsar.pl RSFUPS108R RACK POWER
6
Electrical parameters (tab. 4).
Mains supply
~230 V; 50 Hz
Current up to
1,3 A
Supply power
196 W max.
Output voltage at the PoE ports
Output voltage the recorder – NVR
52 V DC – maintained regardless of the state of battery charge
12 V DC – maintained regardless of the state of battery charge
The output current at the PoE ports
8 x 0,6 A Ʃ=2,3 A (max.)
Output current of the recorder – NVR
4 A
Ripple voltage – output of the NVR recorder
150 mV p-p max.
Battery charge current
(batteries 2x7 Ah / 2x17 Ah / 2x28 Ah, connect
batteries in series)
1 A max. (+/-5 %)
Approximate backup time
5h 30 min
Short-circuit protection SCP and overload
protection OLP
105 % ÷ 150 % of the PSU power, manual restart (failure
requires the disconnection of the DC output)
PSU current consumption
300 mA/27,6 V
Battery circuit protection SCP and reverse
polarity connection
melting fuse
Excessive discharge protection UVP
U<19 V (+/-5 %) – disconnect of connection battery
Optical indication of operation:
LED: AC, DC, TEMP, LoB, ALARM, LINK, PoE
Acoustic operation indication:
Piezoelectric indicator ~75 dB/0,3 m
The ALARM technical output of collective failure
Relay type: 1 A@ 30 V DC/50 V
The F
MAINS
fuse in the 230 V power supply circuit
T 6,3 A
Mechanical parameters (tab. 5).
Mounting dimensions
W=19”, H=2U, D=368
Dimensions
W=482, W
1
=442, H=88, D=368, D
1
=32, D
2
=10 [+/- 2 mm]
Fixation
four-point butt mounting to RACK profiles – the set include 4 M6 screws + cage nuts
Net weight
8,1kg / 8,7kg
Enclosure
Steel plate RAL 9005, black
Connectors
230 V input: the IEC C14 socket with a fuse, power cable 2 m (included)
Technical output ALARM: Φ0,5-2,1 (AWG 24-12) 0,5-1,5 mm
2
Power supply output of the NVR recorder: Φ0,5-2,1 (AWG 24-12) 0,5-1,5 mm
2
power cord 2 m, terminated with the DC 5,5/2,1 plug (included)
Outputs of cameras PoE: sockets RJ45 8P8C
Data output of the UPLINK recorder: RJ45 8P8C jack
Battery output BAT: 6,3F-2,5
Notes
Forced cooling (fan).
Operation safety (tab.6).
Protection class PN-EN 60950-1:2007
I (first)
Protection grade PN-EN 60529: 2002 (U)
IP20
Electrical strength of insulation:
- between input and output circuits of the PSU
- between input circuit and protection circuit
- between output circuit and protection circuit
3000 V AC min.
1500 V AC min.
500 V AC min.
Insulation resistance:
- between input circuit and output or protection circuit
100 MΩ, 500 V DC