Operating instructions

www.pulsar.pl RSFUPS108R RACK POWER
4
Fig. 2. The view of the switch.
Table 2. (See Fig. 3 and 4)
Element no.
[Fig. 3 and 4]
Description
AC OK – green LED, indicating the presence of 230 V voltage
DC OK – green LED, indicating the presence of DC voltage
TEMP – red LED, indicating too high temperature of the power supply (>70 °C)
LoB – red LED, indicating too low battery voltage (<23 V)
LED NVR – green LED indicating voltage at the NVR output
LED ALARM – red LED collective failure indication
NVR – power supply output of the recorder
BAT – battery output
ALARM – technical output of collective failure – relay
BUZZER, micro switch, turning ON / OFF of acoustic indication
switch in the top position, indication ON
switch in the down position, indication OFF
PoE port 1÷8 for cameras IP connection (data + power supply)
2 x UPLINK port (G1/TP, G2/TP)
2 x UPLINK port (G1/SFP, G2/SFP)
230 V INPUT, power socket 230 V, power cable 1,5 m included
F
MAINS
, fuse in the supply circuit 230 V, T 6,3 A/250 V
Fig. 3. The front power of the power supply unit.