Operating instructions

www.pulsar.pl RSFUPS108R RACK POWER
2
Example of use.
CONTENTS:
1. Technical description.
1.1. General description
1.2. Block diagram
1.3. Description of components and connectors
1.4. Specifications
2. Installation.
2.1. Requirements
2.2. Installation procedure
3. Indication of the device operation.
3.1. LED indication of operating status
3.2. Optical indication of the switch operation
3.3. Technical output
3.4. Acoustic indication
4. Operation and use.
4.1. Overload or short circuit of the PSU output
4.2. Battery-assisted operation
4.3. Maintenance
Features:
 DC 52 V uninterruptible power supply of 8 IP cameras
 DC 12 V uninterruptible power supply of the recorder
 Switch 10 ports
8 PoE 10/100 Mb/s ports, (1÷8 ports) (data and power
supply)
2 ports 10/100/1000 Mb/s (ports G1/TP, G2/TP) (UpLink)
2 ports 10/100/1000 Mb/s SFP (G1/SFP, G2/SFP ports)
 30 W for each PoE port, supports devices complaint with
the IEEE802.3af/at (PoE+) standard
 Supports auto-learning and auto-aging of MAC
addresses (1K size)
 battery charging and maintenance control
 excessive discharging (UVP) protection
 battery output protection against short circuit and
reverse connection
 battery charge current: 1 A
(batteries 2x7 Ah / 2x17 Ah / 2x28 Ah)
 Approximate backup time: 5h 30min
 voltage control at the NVR output
 acoustic indication of failure
 LED optical indication: AC, DC, TEMP, LoB,
ALARM, NVR
 the ALARM technical output of collective
failure – relay type, activated by:
 230 V power loss
 low voltage of the PSU (<23 V)
 no voltage at the power supply output of
the recorder
 too high temperature of the PSU (>70 °C)
 the PSU failure
 protections:
 SCP short-circuit protection
 overvoltage protection
 overload protection OLP
 forced cooling (fan)
 warranty – 2 year from the production date