Data Sheet

RCB48V v.1.0/I
B attery for RACK 19" cabinetscontroller 48VDC/5A/4x17Ah
CODE
TYPE
:
:
DESCRIPTION
The RCB48V battery controller is designed for monitoring the status of the 4x17Ah/12V (SLA) battery pack
based on the measurements of resistance, continuity of the battery circuit, voltage, and the charge level. It is also
protected against reverse connection and short circuit in the charging circuit. In the case of failure, a LED light is
activated, which is accompanied by switching of relay contacts and acoustic indication.
EN**
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
B 48VDC attery for RACK 19" cabinetscontroller
The battery controller features:
· Microprocessor-based automation system
· Automatic battery test every 5 min.
· The measurement of the resistance of the battery
circuit
· Monitoring of the continuity of the battery circuit
· Battery Detection
· Low battery voltage indication - DC operation
· Battery output protection against short-circuit and
reverse polarity connection
· Battery compartment for four 7Ah/17Ah/12V
(SLA) batteries
· Technical output of failure - relay type
· Optical indication of failure (LED)
· Acoustic indication of failure
· "Test" button is at the front panel
· Designed to operate with a 54V uninterruptible
power supply unit
· Warranty: 2 years from the production date
Pulsar
®
W
H
D
D
1
W
1