User Instructions

www.pulsar.pl RC24V RACK POWER
3
1. Technical description.
1.1. General description.
The RC24V battery controller is designed for monitoring the status of the 2÷4 battery pack based (the total
capacity of 80Ah/12V (SLA) max. batteries), on the measurements of resistance, continuity of the battery circuit,
voltage, and the charge level. It is also protected against reverse connection and short circuit in the charging
circuit. In the case of failure, a LED light is activated, which is accompanied by switching of relay contacts and
acoustic indication.
1.2. Block diagram.
Fig.1. The block diagram of the controller.
1.3. Description of elements and connectors of the controller
Table 1. Elements of the front panel of the controller.
Component
No. [Fig. 2]
Description
BUZZER, micro switch, enable/disable the acoustic indication
Switch in the upper position, the indication is ON
Switch in the lower position, acoustic indication is OFF
ALARM – Technical output of collective failure - relay type
LED ALARM – red LED indicating failure
TEST – test button
BAT – connector of the charging circuit
A battery compartment for BAT1 battery
A battery compartment for BAT2 battery
A battery compartment for BAT3 battery
A battery compartment for BAT4 battery