Data Sheet
RC24V v.1.0/I
24 10 VDC/ A battery controller for RACK 19" cabinets
CODE
TYPE
:
:
DESCRIPTION
The RC24V battery controller is designed for monitoring the status of the 2÷4 battery pack based (the total
capacity of 80Ah/12V (SLA) max. batteries), on the measurements of resistance, continuity of the battery circuit,
voltage, and the charge level. It is also protected against reverse connection and short circuit in the charging
circuit. In the case of failure, a LED light is activated, which is accompanied by switching of relay contacts and
acoustic indication.
EN**
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
B 24VDC attery for RACK 19" cabinetscontroller
The battery controller features:
· Microprocessor-based automation system
· Automatic battery test every 5 min.
· The measurement of the resistance of the battery
circuit
· Monitoring of the continuity of the battery circuit
· Battery Detection
· Low battery voltage indication - DC operation
· Battery output protection against short-circuit and
reverse polarity connection
· Battery cables includednnection
· Battery compartment for 2÷4 batteries
(the total
capacity of 80Ah/12V (SLA) max. batteries)
· Technical output of failure - relay type
· Optical indication of failure (LED)
· Acoustic indication of failure
· "Test" button is at the front panel
· Designed to operate with a 27,6V uninterruptible
power supply unit
· Warranty - 2 years from the production date
Pulsar
®
W
H
D
D
1
W
1