User Instructions

ManualsBrandsPulsar ManualsEnclosures7U/150mm/17 Ah two-level RACK Security enclosure for RACK 19″ cabinets

Code: RAWO7

Name: 7U/150mm/17Ah two-level RACK Security

enclosure for RACK19" cabinets

v1.1

Edition: 2 from 04.07.2017

Supersedes the edition: 1 from 25.01.2017

1. Application:

The metal RAWO7 enclosure is designed for mounting the alarm control panel and the input/output modules in

RACK19” cabinets. The enclosure has a removable mounting plate (1st level) and a removable hinged mounting plate (2nd

level). The enclosure has a battery compartment for a single 7Ah/12V battery. The mounting plate (1st level) has holes for

mounting transformers of the TOR/TRP/TRZ series and power supply units of the PS…/PSB…/PSBOC… series by Pulsar.

The hinged mounting plate (level II) is fitted with universal holes for mounting of control panels and expansion modules of

the following companies: DSC, PARADOX, RISCO, SATEL, PYRONIX, TEXECOM, TELMOR, ROGER and EBS.

Fig.1

2. Mounting the enclosure to RACK 19” cabinets:

Mount cage nuts for M6 screws in the RACK cabinet, as shown in Figure 2. Use M6 screws to mount the enclosure

to the RACK profiles.

Fig.2

Summary of content (5 pages)

PAGE 1
Code: RAWO7 Name: 7U/150mm/17Ah two-level RACK Security enclosure for RACK19" cabinets v1.1 EN Edition: 2 from 04.07.2017 Supersedes the edition: 1 from 25.01.2017 1. Application: The metal RAWO7 enclosure is designed for mounting the alarm control panel and the input/output modules in RACK19” cabinets. The enclosure has a removable mounting plate (1st level) and a removable hinged mounting plate (2nd level). The enclosure has a battery compartment for a single 7Ah/12V battery.
PAGE 2
3. The introduction of cables into the enclosure: The enclosure has four openings (at each side) for the introduction of cables. All openings are fitted with rubber grommets, Fig. 3. Fig.3 Wires can be introduced in three ways: a) Through rubber grommets – fig.4 Fig.4 b) Using the MM019 / MM020 protection tubes - fig.5. Fig.
PAGE 3
c) Using the MM019 / MM020 protection tubes and the ARAP16P/ ARAP21P cable glands - fig.6 Fig. 6 4. Mounting the transformer/PSU/battery/other modules: The enclosure is equipped with a hinged mounting plate (1st level) with holes for mounting of transformer of the TOR/TRP/TRZ series and power supply units of the PS…/PSB…/PSBOC… series by Pulsar. The enclosure has a battery compartment for a single 7Ah/12V battery. Fig. 7 5.
PAGE 4
6. Dimensioning: 7.
PAGE 5
8. Technical parameters: Battery compartment: Transformer / power supply compartment: Tamper protection: Mounting dimensions: Enclosure dimensions: Net/gross weight: Finish: Application: Notes: Available accessories: Declarations, warranty 17Ah / 12V TOR: 50÷150VA, TRP: 20÷80VA, TRZ: 20÷80VA / series Pulsar PS..., PSB..., PSBOC...