Data Sheet

Accessories for cabinets – battery enclosure
Pulsar
®
RAKU3 v1.0/I
. Battery enclosure 4x17Ah for RACK 19" cabinets
CODE:
NAME:
INTENDED USE
The RAKU3 battery enclosure is designed for installation 1÷4 of 7Ah / 17Ah/12V (SLA) batteries inside RACK 19" cabinets.
Battery outputs are located at the front panel of the housing.
EN
Tel. [phone], Fax. , www.pulsar.pl, e-mail: [e-mail]([phone]
SPECIFICATIONS
Battery compartment 4x17Ah/12V (SLA) max.
Output load 20A max.
Output voltage
60V DC max.
Operating conditions
2nd environmental class, -10
º
C÷40
º
C, ensure free air flow around the enclosure.
Relative humidity 20% ... 90%, no condensation
Mounting dimensions W=19”, H=2U, D=425
Dimensions W=483, W
1
=435, H=88, D=425, D
1
=82 [+/- 2mm]
Enclosure
Steel plate 1,2 mm, color RAL 9005, IP20
Net/gross weight 5,0kg / 5,7kg
Storage temperature
-20ºC...+60ºC
Notes
- Six-point butt mounting to RACK profiles
- The set includes 6 M6 screws + cage nuts + plastic washer
Warranty
2 years from the production date