Data Sheet

Accessories for cabinets – battery enclosure
Pulsar
®
RAKU2 v1.0/I
Battery enclosure 2x17Ah / 4x7Ah for RACK cabinets.
CODE:
NAME:
INTENDED USE
Battery enclosure for RACK 19" cabinets designed for installation of 2x17Ah or 4x7Ah batteries. It is mounted in the rear of the RACK
cabinet (of the RWA / RW / RWD / RS and ZRS series) behind power supply units and uninterruptible power supply switches by Pulsar.
SPECIFICATIONS
External dimensions: W=485, H=90, D=180 [mm, +/-2]
Mounting dimensions: W=19’’, H=2U
Net/gross weight: 1,76 / 1,90 [kg]
Materials: 1,2 mm steel sheet color: RAL9004
Static load: 60 kg
Use: inside
Notes:
- four-point fixing to the RACK rails
- 4 M6 screws + cage nuts + plastic washers
EN
Tel. [phone], Fax. [phone], www.pulsar.pl, e-mail: [e-mail]
Side view of the RACK cabinet
of the RS/ZRS series
Rear view of the RACK cabinet
of the RS/ZRS series
2x17Ah
4x7Ah
2U
rear
Power supply/Pulsar
uninterruptible power
supply switch
Shelf for 2x17Ah /
4x7Ah batteries
front
19"
2U
90 mm
485 mm
120 mm
180 mm
60 mm
430 mm