R1612P v.1.0 R 12V/16x1,5A/PTC RACK mounted power supply for up to 16 HD cameras. EN** Edition: 2 from 10.04.2017 Supercedes the edition: 1 from 28.01.
www.pulsar.pl RACK POWER R1612P Features: DC 12V/16x0,87A uninterruptible power supply for powering HD cameras (14A max.
www.pulsar.pl RACK POWER R1612P CONTENTS: 1. Technical description. 1.1. General description 1.2. Block diagram 1.3. Description of PSU components and connectors 1.4. Specifications 2. Installation. 2.1. Requirements 2.2. Installation procedure 3. Operating status indication. 3.1. LED indication 3.2. Technical output 3.3. Acoustic indication 4. Operation and use. 4.1. Overload or short circuit of the PSU output 4.2. Maintenance 1. Technical description. 1.1. General description.
www.pulsar.pl RACK POWER R1612P switch in the top position, indication ON switch in the down position, indication OFF 230V AC INPUT, power socket 230V AC, power cable 1,5m included FMAINS, fuse in the supply circuit 230V AC, T 3,15A/250V Fig. 2. The front power of the power supply unit. Fig.3. The view of the PSU.
www.pulsar.pl RACK POWER R1612P 1.4. Specifications. - electrical parameters (tab.2) - mechanical parameters (tab.3) - operation safety (tab.4) - operating parameters (tab.5) Electrical parameters (tab. 2).
www.pulsar.pl RACK POWER R1612P 2. Installation. 2.1. Requirements. The PSU RACK shall be mounted by a qualified installer with appropriate permissions and qualifications for 230V/AC installations and low-voltage installations (required and necessary for a given country). The device shall be mounted in confined spaces, according to the environment class II, with normal air humidity (RH=90% max. without condensation) and the temperature from -10°C do +45°C.
www.pulsar.pl RACK POWER R1612P RED LED: ON – too high temperature of the switch mode power supply (>70°C) OFF – standard temperature of the switch mode power supply GREEN LED: on – DC voltage in the AUX1…AUX16 output off – no DC voltage in the AUX1…AUX16 output 3.2. Technical output. The power supply is fitted with the ALARM output of collective failure (relay type).
www.pulsar.pl RACK POWER R1612P WEEE LABEL Waste electrical and electronic equipment must not be disposed of with normal household waste. According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from normal household waste. Pulsar Siedlec 150, 32-744 Łapczyca, Poland Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50 E-mail: biuro@pulsar.pl, sales@pulsar.pl http:// www.pulsar.pl, www.zasilacze.
