Full Product Manual

14
• Drain the detergent reservoir and flush with running water.
• Wipe away any remaining water on all parts and fittings.
• Engage the gun safety lock.
• Store the pressure washer, parts, and accessories in an
area with a temperature above 0°C (32°F).
2000 PSI Pressure Washer
Winterizing and Long-Term Storage
FOLLOW ALL OF THE ABOVE SHUT-DOWN PROCEDURES,ADDING
THE FOLLOWING STEPS….
•
After disconnecting the water supply, and before disconnecting the
high-pressure hose, turn the pressure washer on for 2-3 seconds, until any
remaining water in the pump exits. Turn the unit off immediately.
CONTINUED USE OF THE PRESSURE WASHER WITHOUT THE
WATER SUPPLY ATTACHED WILL CAUSE SEVERE DAMAGE TO
THE UNIT!
•
Always store the pressure washer, parts, and accessories in an area with a
temperature above 0° C (32° F).
WARNING: FAILURE TO COMPLY WITH THESE STORAGE
INSTRUCTIONS WILL RESULT IN DAMAGE TO THE PUMP
ASSEMBLY
.
Maintenance
• This pressure washer is supplied with a closed lubrication system, so no
addition of oil is needed.
• Check all hoses and accessories for damage prior to use.
• Check the water intake filter periodically for deposits. Clean this filter
regularly for maximum performance.