Use and Care Manual

15
1800 PSI Pressure Washer
CLEAN-UP AND STORAGE
Shutting Down the Pressure Washer
WHEN FINISHED USING THE PRESSURE WASHER,FOLLOW THESE
STEPS TO SHUT DOWN THE UNIT:
Turn the pressure washer to the OFF position.
Turn off the water supply.
Before disconnecting high-pressure hose connection, point the gun in a
safe direction and discharge the high-pressure water.
Disconnect high-pressure hose from the pressure
washer and gun.
Disconnect garden hose from the pressure washer.
Remove excess water from the pump by tipping the unit on both sides to
drain any remaining water from the inlet and outlet fittings.
Remove the Water Intake Filter and flush with water to remove dirt or
debris. Return the filter once it is cleaned.
•
•
•
•
•
•
•
High Pressure
Hose Connection
Garden Hose Connection
• Drain the detergent reservoir and flush with running water.
• Wipe away any remaining water on all parts and fittings.
• Engage the gun safety lock.
• Store the pressure washer, parts, and accessories in an
area with a temperature above 0°C (32°F).