20V Lithium-ion Cordless Drill How to Obtain Warranty Service: Take the original receipt and product to the pace of purchase or mail the original receipt and product to the address found on the web site if purchased on-line. Iris recommended you retain all of your receipts covering the purchase and maintenance of your power tool Pulsar will not deny you warranty coverage as long as proof of purchase or service can be obtained.
20V Lithium-ion Cordless Drill 1. SAFETY GUIDELINES-DEFINITIONS This manual contain important information that your need to know and understand in order to protect YOUR SAFETY and fo PREVENT EQUIPMENT PROBLEMS. The following symbols help you recognize this information. Please read the manual and pay attention to these section. WARNING! WARNINGS INDICATE A CERTAINTY OR STRONG POSSIBILITY OF PERSONAL INJURY OR DEATH IF INSTRUCTIONS ARE NOT FOLLOWED.
20V Lithium-ion Cordless Drill LIMITED WARRANTY Limited 3 Year Warranty: From the date of origins! purchase, warrants to the original purchaser, that each power too! sold, sail be free from defect in material and workmanship, for the flees and time period set forth below. Pulsar at ts discretion, agrees fo repair of replace any defective part that upon examination, inspection, and testing by a authorized service dealer, is found to be defective within the origins! warranty period.
20V Lithium-ion Cordless Drill GENERAL PRECAUTIONS {cont'd} = Where there is a risk of falling obj sets or hitting your head on protruding or low level obstructions, a hard hat should be wom. « Be sure you always have sure footing, especially when working on ladders and scaffolding. = Keep electric tools away from humidity and rain. Do not immerse. = When working outdoors, only use tools and extension cables designed and approved for outdoors use.
20V Lithium-ion Cordless Drill DRILL {cont'd) tare-diameter screws requires grater torque power to properly seat the screw. The shuck stops rotating when the selected guarantor is reached. Hers are 19 torus settings: « 1-4: For driving small scows. * 5-8: For driving craws into Soft materials or plastics « 3-11: For driving craws into soft woods. » 12-14: For driving screws into pericardium woods « 15-17: For driving screws into hard woods.
20V Lithium-ion Cordless Drill GENERAL PRECAUTIONS {cont'd} Clf using the power too! inside your house, protect furnishings and floors with 2 suitable dust sheet « Always observe general fire safely precautions when using certain power toss inside your house or workshop. 1t is recommended that you have an appropriate fire extinguisher available at all mes while working. 3.
20V Lithium-ion Cordless Drill DRILL {cont'd) Your new cordless drill has bean engineered and manufactured to the highest possibles standards by Pulsar Products, inc. for dependability, SASE of operation, and operator safety. Property cared Tor, it will give you years of rugged, trouble-freak performance. Vary cars has bean taken to ensure that it reaches you in perfect condition.
20V Lithium-ion Cordless Drill 4. BATTERY CHARGER & PLUG (cont'd) inserting the battery insert the battery pack into the tou! handle. Charging the battery The battery supplied with this power tool Fig A Button contain a test chars only and must be fully s charged before use. Be sure to read all safely instructions before charging the battery. The battery will become warm during charging. This is normal. (Fig A & Fig B} Sigh 1. Connect the the prows cord of the charge with a wall socket.
