SDS

Material Safety Data Sheet
Report No: ZKS180900230-2 Page 5 of 9
immediately.
Methods and materials for cleaning up
Absorb spilled material with an inert absorbent (dry
sand or earth). Scoop contaminated absorbent into an
acceptable waste container. Collect all contaminated
absorbent and dispose of according to directions in
Section 13. Scrub the area with detergent and water;
collect all contaminated wash water for proper
disposal.
Section 7 – Handling and Storage
Handling
Do not dismantle, open or shred secondary Lithium
ion cell;
Don’t handling Lithium ion cell with metalwork. Do
not open, dissemble, crush or burn battery. Ensure
good ventilation/ exhaustion at the workplace.
Prevent formation of dust.
Information about protection against explosions and
fires: Keep ignition sources away- Do not smoke.
Storage
If the Lithium ion cell is subject to storage for such
a long term as more than 3 months, it is
recommended to recharge the Lithium ion cell
periodically.
3 months: -10℃~+40℃, 45 to 85%RH
And recommended at 0℃~+35℃ for long period
storage.
The capacity recovery rate in the delivery state
(50% capacity of fully charged) after storage is
assumed to be 80% or more.
Do not storage Lithium ion cell haphazardly in a
box or drawer where they may short-circuit each
other or be short-circuited by other metal objects.
Keep out of reach of children.
Do not expose Lithium ion cell to heat or fire. Avoid
storage in direct sunlight.
Do not store together with oxidizing and acidic
materials.
Section 8 – Exposure Controls and Personal Protection
Engineering Controls
Use local exhaust ventilation or other engineering
controls to control sources of dust, mist, fumes and
vapor.