PSDCR08128 v.1.1 PSDCR 12V/8A/8x1A/TOPIC Power supply for up to 8 HD cameras with a recorder space. EN** Edition: 2 from 02.07.2018 Supersedes the edition: 1 from 21.06.
www.pulsar.pl PSDCR08128 Features: the 8x1A/12V DC power output for powering 8 HD cameras output voltage adjustment 12V÷15V DC 8 outputs protected with 1A fuses recorder space 400x345x100 wide range of supply voltage 176÷264V AC high efficiency 83% LED indication the enclosure construction is compliant with the requirements of the General Data Protection Regulation GDPR (the possibility of installing two locks with different codes).
www.pulsar.pl PSDCR08128 1. Technical description. 1.1. General description. The PSDCR08128 stabilized power supply is designed to supply HD cameras or other devices requiring stabilized voltage of 12V DC. The output voltage adjustment is adjusted via a potentiometer within the range of 12V÷15V DC. The PSU features 8 outputs protected independently by either glass fuses. A failure (a short circuit) in the output circuit makes a fuse blow and disconnection of the circuit from the DC power supply (+U).
www.pulsar.pl PSDCR08128 Fig.3. The view of the PSU. 1.4. Specifications: - electrical specifications (tab.3) - mechanical specifications (tab.4) - operation safety (tab.5) - operating specifications (tab.6) Electrical specifications (tab. 3).
www.pulsar.pl PSDCR08128 Mechanical specifications (tab. 4). Dimensions W=432, H=607, D+ D1=102+14 [+/- 2mm] W 1=437, H1=612 [+/- 2mm] Dimensions of W 2=400, H2=345, D2=95 [+/- 2mm] recorder space Fixing See figure 3 Net/gross weight 7,6/8,4 kg Enclosure Steel plate, DC01 0,7mm colour: RAL 9003 Closing 2 x cheese-head screw: at the front The possibility of installing two locks with different codes.
www.pulsar.pl PSDCR08128 2.2 Installation procedure. 1. Before installation, make sure that the voltage in the 230V power-supply circuit is cut off. 2. Mount the PSU in a selected location and connect the wires. 3. Connect the power cables (~230VAC) to L-N terminals of the PSU. Connect the ground wire to the terminal marked by the earth symbol. Use a three-core cable (with a yellow and green PE protection wire ) to make the connection.
