User Instructions

www.pulsar.pl PSDCB09129C
5
1.4 Specifications:
- electrical parameters (tab.3)
- mechanical parameters (tab.4)
- operation safety (tab.5)
- operating parameters (tab.6)
Electrical parameters (tab. 3)
Mains supply
176÷264V AC
Current up to
1,4A@230V AC
Supply power
155W max.
Efficiency
83%
Output voltage
11V÷13,8V DC – buffer operation
9,5V÷13,8V DC – battery-assisted operation
Output current t
AMB
<30°C
9x1A + 1A battery charge - refer to chart 1
9x0,77A + 4A battery charge - refer to chart 1
Output current t
AMB
=40°C
9x0,74A + 1A battery charge - refer to chart 1
9x0,41A + 4A battery charge - refer to chart 1
Voltage adjustment range
12÷14V DC
Ripple
120mV p-p max.
Battery charge current
1A/4A max. / 17Ah (± 5%)
Approximate backup time
2h 30min
Short-circuit protection SCP
LB9 STRIP
9x F 1A glass fuse
Overload protection OLP
105 ÷ 150% of power supply, automatic recovery
Battery circuit protection SCP and reverse
polarity connection
polymer fuse
Surge protection
varistors
Overvoltage protection OVP
>16V (automatic recovery)
Excessive discharge protection UVP
U<9,5V (± 5%) – disconnect of connection battery
Tampering protection system:
- TAMPER – indicating unwanted opening of the
PSU’s enclosure
- microswitch, NC contacts (enclosure closed),
0,5A@50V DC (max.)
LED indication:
- AC diode indicating AC power status
- AUX diode indicating DC power status at
the PSU output
- red, normal status – on, failure: off
- green, normal status – on, failure: off
F1÷F9 fuse
F 1A/250V
Mechanical parameters (tab. 4)
Dimensions
W=280, H=292, D+D
1
=82+8 [+/- 2mm]
W
1
=285, H
1
=296 [+/- 2mm]
Fitting battery
185x170x75mm (WxHxD) max
Fixation
see figure 3
Net/gross weight
2.4kg / 2.6kg
Enclosure
Steel plate, DC01 0,7mm colour: RAL 9003
Closing
Cheese head screw x 2 (at the front), lock assembly possible
Connectors
Power supply: Φ0,63-2,50 (AWG 22-10)
OutputsФ0,41÷1,63 (AWG 26-14),
Battery output BAT: 6,3F-2,5
TAMPER output: wires
Notes
The enclosure does not adjoin the assembly surface so that cables can be led.