PSDC 16128 v.1.3 PSDC 12V/8A/16x0,5A Power supply for up to 16 HD cameras - PTC/TOPIC. EN** Edition: 12 from 11.10.2017 Supersedes the edition: 11 from 24.04.
www.pulsar.
www.pulsar.pl PSDC16128 1. Technical description. 1.1 General description. The PSDC16128 stabilized power supply is designed to supply HD cameras or other devices requiring stabilized voltage of 12V DC. The output voltage adjustment range is adjusted via a potentiometer within the range of 12V÷15V DC. The PSU features 16 outputs protected independently by either glass fuses or polymer fuse.
www.pulsar.pl PSDC16128 Fig.2. The view of the PSU’s PCB. Table 2. Elements of the PSU (see fig. 3). Element no.
www.pulsar.pl PSDC16128 1.4. Specifications: - electrical specifications (tab.3) - mechanical specifications (tab.4) - operation safety (tab.5) - operating specifications (tab.6) Electrical specifications (tab. 3).
www.pulsar.pl PSDC16128 Operating specifications (tab.6). Operating temperature Storage temperature Relative humidity Vibrations during operation Impulse waves during operation Direct insolation Vibrations and impulse waves during transport -10ºC...+50ºC -25ºC...+60ºC 20%...90%, without condensation unacceptable unacceptable unacceptable PN-83/T-42106 2. Installation. 2.1 Requirements.
www.pulsar.pl PSDC16128 3.1. LED indication (fig. 4.). • LED1…LED16 green diodes indicate power at the outputs: LB8-A AUX1…AUX8, LB8-B AUX1…AUX8. In case of a power loss at the output (fuse activation), an appropriate diode goes out. (L1 for AUX1, L2 for AUX2 etc.) • LFPS red LED [!] indicates a failure of at least one AUX output (the output’s number is indicated by the green diode). Fig. 4. The view of the PSU panel. 3.2 Technical outputs.
www.pulsar.pl PSDC16128 4.3. Maintenance. Any and all maintenance operations may be performed following the disconnection of the PSU from the power supply network. The PSU does not require performing any specific maintenance measures. However, in case of significant dust level, clean its interior with compressed air. In case of a fuse exchange, use the replacement of the same parameters.
