Data Sheet

PSDC04124 v.1.3/XII
PSDC 12V/4A/4x1A power supply for up to 4 HD cameras
- PTC/TOPIC.
CODE:
TYPE:
EN**
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
PSDC series power supply unit
12V DC Power supply for up to 4 HD cameras
Pulsar
®
DESCRIPTION
The PSDC04124 stabilized power supply is designed to supply HD cameras or other devices requiring
stabilized voltage of 12V DC. The output voltage adjustment range is adjusted via a potentiometer within the
range of 12V÷15V DC. The PSU features 4 outputs protected independently by either glass fuses or
polyswithes. A failure (a short circuit) in the output circuit makes a fuse blow or an activation of the polymer fuse
and disconnection of the circuit from the DC power supply (+U). The PSU is housed in a metallic enclosure with
an indication panel featuring a microswitch indicating unwanted opening of the door (faceplate).
Features:
· the 4x 1A/12VDC power output for powering
4 HD cameras
· output voltage adjustment 12V÷ 15VDC
· 4 outputs, protected with 1A fuses
· jumper selectable fuses: glass fuse or polymer fuse
· wide range of supply voltage 85÷264VAC
· high efficiency 80%
· LED indication
· FPS technical output of fuse activation
indication
· protections:
· SCP short-circuit protection
· OVP over voltage protection
· surge protection
· OLP overload protection
· against tampering
· warranty – 3 year from the production date
W
H
D
W
1
H
1
D
1